RDP Commands
ip router-discovery interface max-advertisement-interval
Configures the maximum time, in seconds, RDP allows between each advertisement packet the router
transmits on the specified interface.
ip router-discovery interface name max-advertisement-interval seconds
Syntax Definitions
name
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The RDP interface maximum advertisement time is not active unless RDP is enabled on the switch and
the specified interface is also enabled.
•
Do not specify a value for the maximum advertisement interval that is less than the value specified for
the minimum advertisement interval. To set the minimum advertisement interval value, use the
ip router-discovery interface min-advertisement-interval command.
•
Note that the minimum and maximum advertisement values define an interval of time in which RDP
transmits advertisement packets. RDP transmits packets at random times within this interval, waiting
no longer than the maximum time specified and no sooner than the minimum time specified before the
next transmission.
Examples
-> ip router-discovery interface Marketing max-advertisement-interval 350
-> ip router-discovery interface Accounting max-advertisement-interval 20
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
The IP interface name that was defined at the time the IP interface was
configured.
The maximum amount of time allowed before the next advertisement
occurs. The range is 4 to1800 seconds.
default
600
November 2009
page 31-7