Show Interfaces Dampening - Dell Z9500 Reference Manual

Hardware is DellForce10Eth, address is 74:86:7a:ff:6f:18
Pluggable media present, Media type is unknown
--More--
Related show interfaces
Commands interface.

show interfaces dampening

Display interface dampening information.
Z9500
Syntax
show interfaces dampening [[interface] [summary] [detail]]
Parameters
interface
summary
detail
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
844
Current address is 74:86:7a:ff:6f:18
Wavelength is 0.00nm
— displays information on a specific physical interface or virtual
(Optional) Enter one of the following keywords and slot/port
or number information:
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 512.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
(OPTIONAL) Enter the keyword summary to display the
current summary of dampening data, including the number
of interfaces configured and the number of interfaces
suppressed, if any.
(OPTIONAL) Enter the keyword detail to display detailed
interface dampening data.
Description
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Interfaces