Chassis Status Leds - Alcatel-Lucent OmniSwitch 6560 Hardware User's Manual

OmniSwitch 6560 Chassis Details

Chassis Status LEDs

The chassis provides a series of status LEDs located on the front panel. These LEDs offer basic status
information for hardware operation and port link and activity status.
LED
OK
VC
PWR
10/100/100 Port LEDs
SFP+ Port LEDs
page 3-22
State
Solid Green
Blinking Green
Solid Amber
Solid Green
Solid Amber
Off
Solid Green
Solid Green
Solid Amber
Solid Amber
Off
Solid Green
Blinking Green
Solid Amber
Blinking Amber
Solid Green
Blinking Green
Description
System Diagnostics and AOS bootup OK
System Diagnostics and AOS in progress
(i.e., performing diagnostics or booting)
System Diagnostics and/or AOS bootup failed
This unit is the master unit
This unit is a slave unit
This unit is in shutdown mode or is not part of
a VC.
Two power supplies are installed in the chassis
and both supplies are functioning normally.
One power supplies is installed in the chassis
and functioning normally (with the second
power supply bay empty).
Two power supplies are installed in the chassis
and one or both supplies has experienced
a failure.
One power supply is installed in the chassis
and has experienced a failure (with the second
power supply bay empty).
No power supply is present.
Valid port link (non-PoE)
Valid port link with activity (non-PoE)
Valid port link (PoE)
Valid port link with activity (PoE)
Valid port link
Valid port link with activity
OmniSwitch 6560 Hardware Users Guide
Chassis and Power Supplies
December 2019