Chassis Status Leds - Alcatel-Lucent OmniSwitch 6465 Hardware User's Manual

Chassis and Power Supplies

Chassis Status LEDs

The chassis provides a series of status LEDs located on the front panel. These LEDs offer basic status
information for hardware operation and port link and activity status.
LED
OK
VC
PS1/PS2
Alarm In/ Out
10/100/1000 Port LEDs Solid Green
SFP 100/1000Base-X
Port LEDs
OmniSwitch 6465 Hardware Users Guide
State
Solid Green
Blinking Green
Solid Amber
Solid Green
Solid Amber
Blinking Amber
Off
Solid Green
Solid Amber
Off
Amber
Off
Blinking Green
Solid Amber
Blinking Amber
Solid Green
Blinking Green
December 2019
OmniSwitch 6465 Chassis Details
Description
System Diagnostics and AOS bootup OK
System Diagnostics and AOS in progress
(i.e., performing diagnostics or booting)
System Diagnostics and/or AOS bootup failed
This unit is the master unit
This unit is a slave unit
Identifies unit number by the number of
blinks.
This unit is in shutdown mode or is not part of
a VC.
Power supply functioning normally.
Power supply not functioning normally.
Power supply not present.
Alarm input or output detected.
No alarm input or output detected.
See "Alarm Relay" on page
Valid port link (non-PoE)
Valid port link with activity (non-PoE)
Valid port link (PoE)
Valid port link with activity (PoE)
Valid port link
Valid port link with activity
3-37.
page 3-13