Usb1 (Modem Testing) - Avaya S8700 Maintenance Manual

USB1 (Modem Testing)

USB1 (Modem Testing)
MO's Name (in
Alarm Log) Alarm Level
USB1 MAJOR
USB1 MINOR
USB1 WARNING
1. Usage: testmodem [-s] | [-l] | [-t arg] | [-?]
no argument
USB1 Modem Testing
This MO provides periodic and on-demand testing. The periodic test runs the
"handshake" test every 15 minutes. The on-demand tests include the
"handshake", "offhook", and "reset_usb" tests.
Alarm Log Entries
Table 8-660. USB1 Alarm Log Entries
EVENT Aux
ID# Data Associated Test
1 (a) Handshake test
2 (b) Modem Offhook test
Notes:
a. Event ID # 1 Handshake Test failed — With three consecutive failures of
either the periodic or on-demand test, the following Minor alarm is logged:
#1,ACT,USB1,A,1,MIN,USB Modem handshake test failed
555-233-143
Initial Linux Command
1
to Run
testmodem
testmodem
testmodem
Performs "short" test.
-s Short test, performs handshake and
offhook
this is also the default option.
-l Performs "short" tests.
-t arg Specific test to perform. Possible
values for arg are:
handshake | offhook |
-? Usage (this).
Alarm
Level
MINOR
MAJOR
Full Name of MO
USB Port Modem Testing
USB Port Modem Testing
USB Port Modem Testing
reset_usb |
On/Off Linux Test to Clear
Board Value
ON
testdupboard
ON
testdupboard
Continued on next page
Issue 1 May 2002 8-1703