Avaya S8700 Maintenance Manual page 2424

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance-Object Repair Procedures

e. Error code 5 does not indicate a current error condition. It indicates that

the number of Call Classifier ports (CLSFY-PT) service was below the

administered threshold, but is now equal to or greater than the threshold.

These errors are typically generated during boot time or other transitional

states when the ports are being brought into service.

f. The total number of Call Classifier ports (CLSFY-PT) currently in service is

below the administered threshold. To clear the alarm, see

Procedure for TTR-LEV'' on page

g. There are currently no DTMR ports in service. To clear the alarm, see

''Repair Procedure for TTR-LEV'' on page

h. There are currently no GPTD ports in service. To clear the alarm, see

''Repair Procedure for TTR-LEV'' on page

i. There are currently no Call Classifier ports (CLSFY-PT) in service. To clear

the alarm, see

Issue 1 May 2002

''Repair Procedure for TTR-LEV'' on page

Troubleshooting