Show Ip Accounting Access-List - Dell Z9500 Reference Manual

in | out
Command EXEC Privilege
Modes
Command
Version 8.5.1.0
History
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0

show ip accounting access-list

Display the IP access-lists created on the switch and the sequence of filters.
Syntax
show ip accounting {access-list access-list-name | cam_count}
interface interface [vrf vrf-name]
Parameters
access-list-
name
cam_count
interface
interface
in | out
vrf vrf-name
Access Control Lists (ACL)
• For a Port Channel interface, enter the keyword port-
channel followed by a number. For Z9500, the range is
from 1 to 512. For the E-Series, the range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet
followed by the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
Identify whether ACL is applied on the ingress or egress side.
Added support for the 4-port 40G line cards on ExaScale.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Enter the name of the ACL to be displayed.
List the count of the CAM rules for this ACL.
Enter the keyword interface then the one of the following
keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 512.
Identify whether ACL is applied on the ingress or egress side.
(Optional) Enter the keyword vrf and then the name of the
VRF to view the IP accounting information on either a default
or a non-default VRF.
209