Show Ip As-Path-Access-List - Dell N1100-ON Reference Manual

Command History
Introduced in version 6.2.0.1 firmware.
Example
In the example below, IPv6 addresses specified by the prefix list apple are
matched through the route map abc.
Router(config)# route-map abc
Router(config-route-map)# match ipv6 address prefix-list apple

show ip as-path-access-list

This command displays the contents of AS path access lists.
Syntax
show ip as-path-access-list [ as-path-list-number ]
• as-path-list-number—(Optional) When an AS path list number is
specified, the output is limited to the single AS path list specified. Integer
from 1 to 500.
Default Configuration
No match criteria are configured by default.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes.
User Guidelines
There are no user guidelines for this command.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console#show ip as-path-access-list
AS path access list 1
deny _100_
deny ^100$
Layer 3 Routing Commands
1399