Route-Map - Dell S4810 Reference Manual

Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Related
match interface
Commands
match ip address
match ip next-hop
match ip route-source
routers.
match metric
match route-type

route-map

Enable a route map statement and configure its action and sequence number. This command also places
you in ROUTE-MAP mode.
S4810
Syntax
route-map map-name [permit | deny] [sequence-number]
To delete a route map, use the no route-map map-name [permit | deny]
[sequence-number] command.
Parameters
map-name
permit
deny
sequence-
number
Access Control Lists (ACL)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— redistributes routes that match the next-hop interface.
— redistributes routes that match an IP address.
— redistributes routes that match the next-hop IP address.
— redistributes routes that match routes advertised by other
— redistributes routes that match a specific metric.
— redistributes routes that match a route type.
Enter a text string of up to 140 characters to name the route
map for easy identification.
(OPTIONAL) Enter the keyword permit to set the route map
default as permit. If you do not specify a keyword, the default
is permit.
(OPTIONAL) Enter the keyword deny to set the route map
default as deny.
(OPTIONAL) Enter a number to identify the route map for
editing and sequencing with other route maps. You are
281