Dell#show dot1x cos-mapping interface tengigabitethernet 0/32
mac-address 00:00:00:00:00:10
Supplicant Mac: 0 0 0 0 0 10 Lookup for Mac:
802.1p CoS re-map table on Te 0/32:
----------------------------------
802.1p CoS re-map table for Supplicant: 00:00:00:00:00:10
Dot1p
0
1
2
3
4
5
6
7
Dell#
show dot1x interface
Display the 802.1X configuration of an interface.
S4810
Syntax
show dot1x interface interface [mac-address mac-address]
Parameters
interface
mac-address
Defaults
none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
802.1X
Remapped Dot1p
7
6
5
4
3
2
1
0
Enter one of the following keywords and slot/port or number
information:
•
For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
•
For a Fast Ethernet interface, enter the keyword
FastEthernet then the slot/port information.
•
For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
(Optional) MAC address of a supplicant.
EXEC
EXEC privilege
201