Show Ethernet Cfm Maintenance-Points Remote - Dell S4810 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.7.0
Version 8.3.1.0
Example
Dell#show ethernet cfm maintenance-points local mip
-----------------------------------------------------
MPID Domain Name Level
-----------------------------------------------------
0 service1
0 service1

show ethernet cfm maintenance-points remote

Display the MEP Database.
S4810
Syntax
show ethernet cfm maintenance-points remote detail [active |
domain {level | name} | expired | waiting]
Parameters
active
domain [name |
level]
expired
waiting
Defaults none
Command EXEC Privilege
Modes
802.1ag
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
MA Name VLAN
4
My_MA 3333
4
Your_MA 3333
Enter the keyword active to display only the MEPs in active
state.
Enter the keyword domain then the domain name or domain
level.
Enter the keyword expired to view MEP entries that have
expired due to connectivity failure.
Enter the keyword waiting to display MEP entries waiting
for response.
Type Port CCM-Status
Dir MAC
MIP Gi 0/5 Disabled
DOWN 00:01:e8:0b:c6:36
MIP Gi 0/5 Disabled
UP 00:01:e8:0b:c6:36
175