Dell S4810 Reference Manual page 148

stack-unit unit-
ID
trace-flags
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.5.1.0
Version 7.6.1.0
Example
Dell#show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM
RTM
VRRP
L2PM
ACL
OSPF
PIM
IGMP
SNMP
EVTTERM
MRTM
DSM
148
• For a Port Channel interface, enter the keyword port-
channel then a number: The range is from 1 to 128.
• For a 10G Ethernet interface, enter the keyword
TenGigabitEthernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Enter the keyword stack-unit then the stack member
number to display IFM information for that unit. The range is
from 0 to 1.
Enter the keyword trace-flags to display IFM information
for internal trace flags.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced for the C-Series and S-Series.
0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31
0 0x00000000 0x00000000 0x800010ff 0x01930000 43
0 0x00000000 0x00000000 0x803330f3 0x00400000 39
0 0x00000000 0x00000000 0x87ff79ff 0x0e032200 45
0 0x00000000 0x00000000 0x867f50c3 0x000f0218 44
0 0x00000dfa 0x00400098 0x00000000 0x00000000 0
0 0x000000f3 0x00030000 0x00000000 0x00000000 0
0 0x000e027f 0x00000000 0x00000000 0x00000000 0
0 0x00000000 0x00000000 0x800302c0 0x00000002 30
0 0x00000000 0x00000000 0x800002c0 0x00000000 29
0 0x00000000 0x00000200 0x81f7103f 0x00000000 38
0 0x00000000 0x00000000 0x80771003 0x00000000 32
NOTE: This option is only available on the S-Series.
Control and Monitoring