Ip Access-Group; Show Acl-Vlan-Group - Dell S4810 Reference Manual

ip access-group

Apply an egress IP ACL to the ACL VLAN group.
Syntax
ip access-group {group name} out implicit-permit
Parameters
group-name
out
implicit-permit
Default None
Command CONFIGURATION (conf-acl-vl-grp)
Modes
Command
Version 9.3.
History
(0.0)
Usage You can apply only an egress IP ACL on an ACL VLAN group.
Information

show acl-vlan-group

Display all the ACL VLAN groups or display a specific ACL VLAN group, identified by name.
Syntax
show acl-vlan-group {group-name | detail}
Parameters
group-name
detail
Default No default behavior or values
Command
EXEC
Modes
EXEC Privilege
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
Enter the name of the ACL VLAN group where you want the
egress IP ACLs applied, up to 140 characters.
Enter the keyword out to apply the ACL to outgoing traffic.
Enter the keyword implicit-permit to change the default
action of the ACL from implicit-deny to implicit-permit (that
is, if the traffic does not match the filters in the ACL, the
traffic is permitted instead of dropped).
Introduced on the S4810, S4820T, and Z9000 platforms.
(Optional) Display only the ACL VLAN group that is specified,
up to 140 characters.
Display information in a line-by-line format to display the
names in their entirety.
Without the detail option, the output displays in a table style
and information may be truncated.
347