Dell S4810 Reference Manual page 202

Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.4.2.1
Version 7.6.1.0
Usage
If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X
Information
configuration details (Port Authentication status, Untagged VLAN ID, Authentication
PAE state, and Backend state) are displayed for each supplicant, as shown in the
following example.
Example
Dell#show dot1x interface tengigabitethernet 0/32
802.1x information on Te 0/32:
-----------------------------
Dot1x Status:
Port Control:
Port Auth Status:
Re-Authentication:
Untagged VLAN id:
Guest VLAN:
Guest VLAN id:
Auth-Fail VLAN:
Auth-Fail VLAN id:
Auth-Fail Max-Attempts:
Mac-Auth-Bypass:
Mac-Auth-Bypass Only:
Tx Period:
Quiet Period:
ReAuth Max:
Supplicant Timeout:
Server Timeout:
Re-Auth Interval:
Max-EAP-Req:
Host Mode:
Auth PAE State:
Backend State:
Dell#
Example (mac-
Dell#show dot1x interface tengigabitethernet 0/32 mac-address
address)
00:00:00:00:00:10
Supplicant Mac: 0 0 0 0 0 10 Lookup for Mac:
802.1x information on Te 0/32:
-----------------------------
Dot1x Status:
Port Control:
Re-Authentication:
Guest VLAN:
202
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added the mac-address option on the C-Series and S-
Series.
Introduced on the C-Series, E-Series, and S-Series.
Enable
AUTO
AUTHORIZED(MAC-AUTH-BYPASS)
Disable
400
Enable
100
Disable
NONE
NONE
Enable
Enable
3 seconds
60 seconds
2
30 seconds
30 seconds
3600 seconds
2
SINGLE_HOST
Authenticated
Idle
Enable
AUTO
Disable
Enable
802.1X