Show Acl-Vlan-Group Detail - Dell S4810 Reference Manual

Parameters
group-name
Default No default behavior or values
Command CONFIGURATION
Modes
Command
Version 9.3(0.0)
History
Usage You can have up to eight different ACL VLAN groups at any given time. When you
Information configure an ACL VLAN group, you enter the ACL VLAN Group Configuration
mode.
To avoid the problem of excessive consumption of CAM area, you can configure
ACL VLAN groups that combines all the VLANs that are applied with the same ACL
in a single group. A unique identifier for each of ACL attached to the VLAN is used
as a handle or locator in the CAM area instead of the VLAN id. This method of
processing signficiantly reduces the number of entries in the CAM area and saves
memory space in CAM.
You can create an ACL VLAN group and attach the ACL with the VLAN members.
Optimization is applicable only when you create an ACL VLAN group. If you apply
an ACL separately on the VLAN interface, each ACL maps with the VLAN and
increased CAM space utilization occurs.
Attaching an ACL individually to VLAN interfaces is similar to the behavior of ACL-
VLAN mapping storage in CAM prior to the implementation of the ACL VLAN group
functionality.

show acl-vlan-group detail

Display all the ACL VLAN Groups or display a specific ACL VLAN Group by name. To display the names in
their entirety, the output displays in a line-by-line format.
Syntax
show acl-vlan-group detail
Parameters
detail
Default No default behavior or values
Command
EXEC
Modes
EXEC Privilege
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
Specify the name of the ACL VLAN group. The name can
contain a maximum 140 characters.
Introduced on the S4810, S4820T and Z9000 platforms
Display information in a line-by-line format to display the
names in their entirety.
Without the detail option, the output is displayed in a table
style and information may be truncated.
355