Traceroute Cache Hold-Time - Dell S4810 Reference Manual

Defaults none
Command ECFM DOMAIN
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0

traceroute cache hold-time

Set the amount of time a trace result is cached.
S4810
Syntax
traceroute cache hold-time minutes
Parameters
minutes
Defaults 100 minutes
Command ETHERNET CFM
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
180
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Enter a hold-time. The range is from 10 to 65535 minutes.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
802.1ag