Show Ip As-Path-Access-Lists - Dell S4810 Reference Manual

Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.8.1.0
pre-Version
6.1.1.0
Usage To apply the AS-PATH ACL to BGP routes, use the match as-path or neighbor
Information
filter-list commands.
Example
Dell(conf)#ip as-path access-list TestPath
Dell(config-as-path)#
Related
match as-path
Commands

show ip as-path-access-lists

Display the all AS-PATH access lists configured on the E-Series.
S4810
Syntax
show ip as-path-access-lists
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Access Control Lists (ACL)
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
Introduced on the E-Series.
— matches on routes contain a specific AS-PATH.
EXEC
EXEC Privilege
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
297