Radius-Server Key - Dell Force10 Z9000 Reference Manual

Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.0
Usage
Use this command to configure any number of RADIUS server hosts for each server host that is
Information
configured. FTOS searches for the RADIUS hosts in the order they are configured in the
software.
The global default values for the timeout, retransmit, and key optional parameters are
applied, unless those values are specified in the radius-server host or other
commands. If you configure the timeout, retransmit, or key values, you must include
those keywords when using the no radius-server host command syntax to return to
the global default values.
Related
login authentication
Commands

radius-server key

radius-server retransmit
information.
radius-server timeout
radius-server key
Configure a key for all RADIUS communications between the switch and the RADIUS host server.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax radius-server key [encryption-type] key
To delete a password, use the no radius-server key command.
Parameters
encryption-type
key
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Introduced on the S4810.
Authentication key length increased to 42 characters.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– sets the database to be checked when a user logs in.
– sets an authentication key for RADIUS communications.
– sets the number of times the RADIUS server attempts to send
– sets the time interval before the RADIUS server times out.
(OPTIONAL) Enter either zero (0) or 7 as the encryption type for the
key entered. The options are:
• 0 is the default and means the key is not encrypted and
stored as clear text.
• 7 means that the key is encrypted and hidden.
Enter a string that is the key to be exchanged between the switch and
RADIUS servers. It can be up to 42 characters long.
Introduced on the Z9000.
1309