Aaa Authorization Exec; Privilege Level (Configuration Mode) - Dell Force10 Z9000 Reference Manual

aaa authorization exec

Set parameters that restrict (or permit) a user's access to EXEC-level commands.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax aaa authorization exec {name | default} {local || tacacs+ ||
if-authenticated || none}
To disable authorization checking for EXEC level commands, use the no aaa
authorization exec command.
Parameters
name
default
local
tacacs+
none
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.0

privilege level (CONFIGURATION mode)

Change the access or privilege level of one or more commands.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax privilege mode {level level command | reset command}
To delete access to a level and command, use the no privilege mode level level
command command.
Parameters
mode
Define a name for the list of authorization methods.
Define the default list of authorization methods.
Use the authorization parameters on the system to perform
authorization.
Use the TACACS+ protocol to perform authorization.
Enter the keyword none to apply no authorization.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Added support for RADIUS.
Enter one of the following keywords as the mode for which you are
controlling access:
• configure for CONFIGURATION mode
• exec for EXEC mode
• interface for INTERFACE modes
1291