Enable Secret - Dell Force10 Z9000 Reference Manual

password
Defaults Not configured.
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage Only Dell Force10 Technical Support staff use this command.
Information

enable secret

Change the password for the enable command.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax enable secret [level level] [encryption-type] password
To delete a password, use the no enable secret [encryption-type] password
[level level] command.
Parameters
level
encryption-type
password
Defaults No password is configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
1298
Use this parameter only with a password that you copied from the
show running-config file of another Dell Force10 router.
Enter a text string, up to 32 characters long, as the clear text
password.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
level
(OPTIONAL) Enter the keyword level followed by a number as the
level of access. The range is 1 to 15.
(OPTIONAL) Enter the number 5 or 0 as the encryption type.
Enter a 5 followed by a text string as the hidden password. The text
string must be a password that was already encrypted by a Dell
Force10 router.
Use this parameter only with a password that you copied from the
show running-config file of another Dell Force10 router.
Enter a text string, up to 32 characters long, as the clear text
password.
level = 15.
Introduced on the Z9000.
Introduced on the S4810.