Password-Attributes - Dell Force10 Z9000 Reference Manual

tacacs-server key
client.
username

password-attributes

Configure the password attributes (strong password).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax password-attributes [min-length number] [max-retry number]
[character-restriction [upper number] [lower number] [numeric
number] [special-char number]]
To return to the default, use the no password-attributes [min-length number]
[max-retry number] [character-restriction [upper number] [lower
number] [numeric number] [special-char number]] command.
Parameters
min-length
number
max-retry
character-
restriction
upper
lower
numeric
special-char
number
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.3.1.0
Related password
Commands
– configures a key for communication between a TACACS+ server and
– establishes an authentication system based on user names.
(OPTIONAL) Enter the keywords min-length followed by the
number of characters. The range is 0 to 32 characters.
number
(OPTIONAL) Enter the keywords max-retry followed by the
number of maximum password retries. The range is 0 to 16.
(OPTIONAL) Enter the keywords character-restriction to
indicate a character restriction for the password.
number
(OPTIONAL) Enter the keyword upper followed the upper number.
The range is 0 to 31.
number (OPTIONAL) Enter the keyword lower followed the lower number.
The range is 0 to 31.
number
(OPTIONAL) Enter the keyword numeric followed the numeric
number. The range is 0 to 31.
(OPTIONAL) Enter the keywords special-char followed the
number of special characters permitted. The range is 0 to 31.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– specifies a password for users on terminal lines.
1301