Dot1X Reauthentication; Dot1X Reauth-Max - Dell Force10 Z9000 Reference Manual

To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds
Defaults 30 seconds
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.4.1.0

dot1x reauthentication

Enable periodic re-authentication of the client.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax dot1x reauthentication [interval seconds]
To disable periodic re-authentication, use the no dot1x reauthentication
command.
Parameters
interval
Defaults 3600 seconds (1 hour)
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.4.1.0
Related interface range
Commands

dot1x reauth-max

Configure the maximum number of times a port can re-authenticate before the port becomes unauthorized.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax dot1x reauth-max number
1320
Enter the number of seconds. The range is 1 to 65535. The default is
30.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
seconds
(Optional) Enter the keyword interval followed by the interval
time, in seconds, after which re-authentication will be initiated. The
range is 1 to 31536000 (1 year). The default is3600 (1 hour).
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
– configures a range of interfaces.