Radius-Server Timeout; Tacacs+ Commands; Debug Tacacs - Dell Force10 Z9000 Reference Manual

radius-server timeout

Configure the amount of time the RADIUS client (the switch) waits for a RADIUS host server to reply to a request.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax radius-server timeout seconds
To return to the default value, use the no radius-server timeout command.
Parameters
seconds
Defaults 5 seconds
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.0
Related radius-server host
Commands

TACACS+ Commands

FTOS supports TACACS+ as an alternate method for login authentication.

debug tacacs+

View TACACS+ transactions to assist with troubleshooting.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug tacacs+
To disable debugging of TACACS+, use the no debug tacacs+ command.
Defaults Disabled.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Enter the number of seconds between an unsuccessful attempt and
the FTOS times out. The range is zero (0) to 1000 seconds. The default
is 5 seconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– configures a RADIUS host.
Introduced on the Z9000.
1311