Show Qosprofile - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

QoS Commands

show qosprofile

show qosprofile {<qosprofile>} {port <portlist>}

Displays QoS information for the switch.

Syntax Description

Specifies a QoS profile name.

Specifies a list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.

Displays QoS information for all profiles.

Usage Guidelines

Information displayed includes:

• QoS profile name

• Minimum bandwidth

• Maximum bandwidth

• A list of all traffic groups to which the QoS profile is applied

The following command shows the QoS information for the specified port:

show qosprofile 2:1

Following is sample output from this command:

Q0 using QP1

Q1 using QP2

Q2 using QP3

Q3 using QP4

Q4 using QP5

Q5 using QP6

Q6 using QP7

Q7 using QP8

This command was available in ExtremeWare 2.0.

This command was added to the Summit "e" series of switches in ExtremeWare 7.1e

This command was modified in ExtremeWare 7.2e to support a port list.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5