Enable Igmp Snooping With-Proxy - Extreme Networks ExtremeWare Command Reference Manual

enable igmp snooping with-proxy

enable igmp snooping with-proxy
enable igmp snooping with-proxy
Description
Enables the IGMP snooping proxy. The default setting is enabled.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
This command can be used for troubleshooting purpose. It should be enabled for normal network
operation. The command does not alter the snooping setting. IP multicast forwarding should be
disabled globally for this command.
Enabling the proxy allows the switch to suppress the duplicate join requests on a group to forward to
the connected layer 3 switch. The proxy also suppresses unnecessary IGMP leave messages so that they
are forwarded only when the last member leaves the group.
Example
The following command enables the IGMP snooping proxy:
enable igmp snooping with-proxy
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide 1169