Configure Bgp Peer-Group No-Dampening - Extreme Networks ExtremeWare XOS Command Reference Manual

configure bgp peer-group no-dampening

configure bgp peer-group no-dampening
configure bgp peer-group <peer-group-name> no-dampening
Description
Configures no route flap dampening for a BGP peer group (disables route flap dampening).
Syntax Description
peer-group-name Specifies a BGP peer group.
Default
This feature is disabled by default.
Usage Guidelines
Use the following command to enable route flap dampening for a BGP peer-group:
configure bgp peer-group <peer-group-name> {address-family [ipv4-unicast | ipv4-
multicast]} dampening {{half-life <half-life-minutes> {reuse-limit <reuse-limit-
number> supress-limit <suppress-limit-number> max-suppress <max-suppress-minutes>}} |
policy-filter [<policy-name> | none]}
Example
The following command disables route flap dampening to the BGP peer group outer:
configure bgp peer-group outer no-dampening
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1459
ExtremeWare XOS 11.3 Command Reference