Configure Bgp Neighbor Timer - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

configure bgp neighbor timer

configure bgp neighbor [<remoteaddr> | all] timer keep-alive <keepalive>

hold-time <holdtime>

Configures the BGP neighbor timers.

Syntax Description

The default keepalive setting is 60 seconds. The default hold time is 180 seconds.

Usage Guidelines

The BGP neighbor or BGP protocol must be disabled before changing the timer values.

The following command configures the BGP neighbor timers:

configure bgp neighbor 192.168.1.5 timer keep-alive 120 hold-time 360

This command was first available in ExtremeWare XOS 10.1.

This command required an Advanced Core license in ExtremeWare XOS 11.1.

Platform Availability

This command is available on platforms with a Core or an Advanced Core license.

ExtremeWare XOS 11.3 Command Reference

Specifies an IP address.

Specifies all neighbors.

Specifies a BGP neighbor timer keepalive time in seconds. The range is 0 to

21,845 seconds.

Specifies a BGP neighbor timer hold time in seconds. The range is 0 and

3 to 65,535 seconds.

configure bgp neighbor timer

Do you have a question about the ExtremeWare XOS and is the answer not in the manual?

Extremeware xos 11.3