Configure Bgp Neighbor As-Path-Filter - Extreme Networks ExtremeWare Command Reference Manual

configure bgp neighbor as-path-filter

configure bgp neighbor [<ip address> | all] as-path-filter [in | out] [none
| <access profile>]
Description
Configures the AS path filter for a neighbor.
Syntax Description
ip address
all
in
out
none
access profile
Default
N/A.
Usage Guidelines
The filter is defined using the access-profile mechanism and can be installed on the input side and/or
the output side of the router.
Example
The following command configures the AS path filter for a neighbor based on the access profile nosales:
configure bgp neighbor 192.1.1.22 as-path-filter in nosales
History
This command was available in ExtremeWare 6.1.
Platform Availability
This command is available on "i" series of switches.
ExtremeWare 7.5 Command Reference Guide
Specifies an IP address.
Specifies all neighbors.
Specifies to install the filter on the input side.
Specifies to install the filter on the output side.
Specifies to remove the filter.
Specifies an access profile.
configure bgp neighbor as-path-filter
1861