Configure Bgp Neighbor Send-Community - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands

configure bgp neighbor send-community

configure bgp neighbor [<ip address> | all] [send-community |
dont-send-community]
Description
Configures whether the community path attribute associated with a BGP NLRI should be included in
the route updates sent to the BGP neighbor.
Syntax Description
ip address
all
send-community
dont-send-community
Default
N/A.
Usage Guidelines
A BGP community is a group of BGP destinations that require common handling. ExtremeWare
supports the following well-known BGP community attributes:
• no-export
• no-advertise
• no-export-subconfed
Example
The following command includes the community path attribute associated with a BGP NLRI in the
route updates sent to all BGP neighbors:
configure bgp neighbor all send-community
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
1422
Specifies an IP address.
Specifies all neighbors.
Specifies to include the community path attribute.
Specifies not to include the community path attribute.
ExtremeWare Software 7.3.0 Command Reference Guide