Configure Bgp Cluster-Id - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands—"i" Series Switches Only

configure bgp cluster-id

configure bgp cluster-id <bgp cluster id (0 - 4294967295)>
Description
Configures the local cluster ID.
Syntax Description
bgp cluster id
Default
N/A.
Usage Guidelines
Used when multiple route reflectors are used within the same cluster of clients.
Extreme Networks recommends disabling BGP before configuring the cluster ID.
Example
The following command appends a BGP route reflector cluster ID to the cluster list of a route:
configure bgp cluster-id 40000
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on "i" series of switches.
1854
Specifies a 4 byte field used by a route reflector to recognize updates from
other route reflectors in the same cluster.
ExtremeWare 7.5 Command Reference Guide