Config Ospf Cost - Extreme Networks ExtremeWare Command Reference Manual

config ospf cost

config ospf [area <area identifier> | vlan [<vlan name> | all]] cost
[automatic | <number>]
Description
Configures the cost metric of one or all interface(s).
Syntax Description
area identifier
vlan name
all
automatic
number
Default
The default cost isautomatic.
Usage Guidelines
None.
Example
The following command configures the cost metric of the VLAN accounting:
config ospf area 0.0.0.6 vlan accounting cost 10
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies an OSPF area.
Specifies a VLAN name.
Specifies all VLANs.
Determine the advertised cost from the OSPF metric table.
Specifies the cost metric.
config ospf cost
919