Configure Iparp Add - Extreme Networks ExtremeWare Command Reference Manual

configure iparp add

configure iparp add <ip address> <mac_address>
Description
Adds a permanent entry to the ARP table. Specify the IP address and MAC address of the entry.
Syntax Description
ip address
mac_address
Default
N/A
Usage Guidelines
Add a permanent IP ARP entry to the system. The
address to locate a suitable interface.
Example
The following command adds a permanent IP ARP entry to the switch for IP address 10.1.2.5:
configure iparp add 10.1.2.5 00:11:22:33:44:55
History
This command was available in ExtremeWare 2.0.
This command was added to the "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies an IP address.
Specifies a MAC address.
is used to match the IP interface
ip address
configure iparp add
1663