Configure Esrp Ports Restart - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure esrp ports restart

configure esrp ports restart
configure esrp ports <ports> restart
Description
Configures ESRP to restart ports if there is a state change and the downstream switch is from another
vendor.
Syntax Description
ports Specifies one or more ports or slots and ports.
Default
N/A.
Usage Guidelines
If an ESRP domain becomes a slave, ESRP disconnects member ports that have port restart enabled. The
disconnection of these ports causes downstream devices to remove the ports from their FDB tables.
After 3 seconds the ports re-establish connection with the ESRP-enabled device. This feature allows you
to use ESRP in networks that include equipment from other vendors.
If switch becomes a slave, ESRP disconnects the physical links of member ports that have port restart
enabled.
An ESRP restart port cannot be a mirroring port, software-controlled redundant port, or Netlogin port.
Example
The following command enables port restart for ports 7-9 in slot 3 on the ESRP master domain:
configure esrp port 3:7-3:9 restart
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
1273
ExtremeWare XOS 11.5 Command Reference Guide