Unconfigure Stpd Ports Link-Type - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

unconfigure stpd ports link-type

unconfigure stpd <stpd_name> ports link-type <port_list>

Returns the specified port to the factory default setting of broadcast link.

Syntax Description

All ports are broadcast link types.

Usage Guidelines

If your STPD has the same name as another component, for example a VLAN, you must enter the

keyword to specify the STPD. If your STPD has a name unique only to that STPD, the keyword

If the switch operates in 802.1D mode, any configured port link type will behave the same as the

broadcast link type.

In an MSTP environment, configure the same link types for the CIST and all MSTIs.

The following command configures slot 2, ports 1 through 4 to return to the factory default of broadcast

links in STPD s1:

unconfigure stpd s1 ports link-type 2:1-2:4

This command was available in ExtremeWare XOS 10.1.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.5 Command Reference Guide

Specifies an STPD name on the switch.

Specifies one or more ports or slots and ports.

unconfigure stpd ports link-type

Extremeware xos 11.5