Configure Vlan Ipaddress - Extreme Networks ExtremeWare Command Reference Manual

VLAN Commands

configure vlan ipaddress

configure vlan <vlan name> ipaddress <ipaddress> {<netmask> | <mask length>
Description
Assigns an IP address and an optional subnet mask to the VLAN.
Syntax Description
vlan name Specifies a VLAN name.
ipaddress Specifies an IP address.
netmask Specifies a subnet mask in dotted-quad notation (for example, 255.255.255.0).
mask length Specifies a subnet mask as the number of bits (for example, /24).
Default
N/A
Usage Guidelines
The VLAN must already exist before you can assign an IP address. Use the
create the VLAN.
NOTE
If you plan to use the VLAN as a control VLAN for an EAPS domain, do NOT configure the VLAN with
an IP address.
Example
The following commands are equivalent; both assign an IP address of 10.12.123.1 to a VLAN named
accounting:
configure vlan accounting ipaddress 10.12.123.1/24
configure vlan accounting ipaddress 10.12.123.1 255.255.255.0
History
This command was first available in ExtremeWare 1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
380
command to
create vlan
ExtremeWare 7.5 Command Reference Guide