Managing Your Sentriant Ag License; Entering A New License Key; Table 13: Service Stop And Restart Commands - Extreme Networks Sentriant AG Software User's Manual

System Administration
http://www.extremenetworks.com/services/resources/, or (800) 998-2408.

Table 13: Service Stop and Restart Commands

Command
service watchdog stop
service watchdog start
service watchdog
restart
service nac-es status
service nac-ms status
reboot
shutdown -hy 0

Managing your Sentriant AG License

Sentriant AG is licensed on a concurrent-IP basis. If the number of licensed IP addresses is at the
maximum, an endpoint trying to connect is not scanned, and is denied/granted access based on the
policy for untestable endpoints. A notification that the endpoint limit has been exceeded appears in the
interface, and the administrator receives an email (if notifications are enabled).

Entering a New License Key

Extreme Networks, Inc. distributes license keys as text files. Due to the license key's length, copy and
paste the license key directly out of the text file.
To enter a new license key:
Home window>>System Configuration>>License
1 Open the text file containing the license key. Copy the key, including the double equal signs (==).
352
Description
This command stops all the NAC software processes on
the server
(MS and/or ES processes, as necessary).
This command starts all the (stopped) NAC software
processes on the server
(MS and/or ES processes, as necessary).
This command restarts all the NAC software processes
on the server
(MS and/or ES processes, as necessary)
This command shows the current status of the ES
processes on the server
(Applies only to an ES or a single server installation)
This command shows the current status of the MS
processes on the server
(Applies only to an MS or a single server installation)
This command stops all services gracefully and reboots
the server
This command shuts down the system gracefully so it
will be ready for poweroff
Sentriant AG Software Users Guide, Version 5.2