Disable Snmp Traps Port-Up-Down - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Managing the Switch

disable snmp traps port-up-down

disable snmp traps port-up-down ports [all | mgmt | <portlist>]

Prevents SNMP port up/down traps (also known as link up and link down traps) from being sent from

the switch for the indicated ports.

Syntax Description

Usage Guidelines

This command is used to disable the sending of link up and link down traps for the specified ports. To

see which ports do not have such traps disabled, use the show management command.

The following command will prevent link up or link down traps from being sent for any port on the

switch (except the management port if it has one).

disable snmp traps port-up-down all

This command was first available in ExtremeWare 6.2.2

This command was modified to include the management port in ExtremeWare 7.0.0.

Platform Availability

This command is available on all platforms.

Specifies that no link up/down traps should be sent for all ports. This does not

include the management port which must be explicitly specified.

Specifies that no link up/down traps should be sent for the management port.

This option will only appear on platforms that have a management port.

Specifies the list of ports.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0