Show Snmpv3 Engine-Info - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

show snmpv3 engine-info

show snmpv3 engine-info
Description
Displays information about the SNMPv3 engine on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines:
The following show engine-info output is displayed:
• EngineID—Either the ID auto generated from MAC address of switch, or the ID manually
configured.
• EngineBoots—Number of times the agent has been rebooted.
• EngineTime—Time since agent last rebooted, in centiseconds.
• Max. Message Size—Maximum SNMP Message size supported by the Engine (8192).
Example
The following command displays information about the SNMPv3 engine on the switch:
show snmpv3 engine-info
The following is output from this command:
SNMP Engine-ID
SNMP Engine Boots
SNMP Engine Time
SNMP Max. Message Size : 8192
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
228
: 80:00:07:7c:03:00:01:30:23:c1:00 'H'
: 4
: 1852673
ExtremeWare 7.5 Command Reference Guide