Configure Sntp-Client Server - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure sntp-client server

configure sntp-client [primary | secondary] server <host name | ipaddress>]
Description
Configures an NTP server for the switch to obtain time information.
Syntax Description
primary
secondary
host name/ip
ipaddress
Default
N/A.
Usage Guidelines
Queries are first sent to the primary server. If the primary server does not respond within 1 second, or if
it is not synchronized, the switch queries the second server. If the switch cannot obtain the time, it
restarts the query process. Otherwise, the switch waits for the
querying again.
Example
The following command configures a primary NTP server:
configure sntp-client primary server 10.1.2.2
History
This command was first available in ExtremeWare 4.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
178
Specifies a primary server name.
Specifies a secondary server name.
Specifies a host name.
Specifies an IP address.
sntp-client update interval
ExtremeWare 7.5 Command Reference Guide
before