Configure Snmpv3 Delete Target-Params - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure snmpv3 delete target-params

configure snmpv3 delete target-params [{{hex <hex value>} <param name>} |
all]
Description
Delete SNMPv3 target parameters.
Syntax Description
hex
param name
Default
N/A.
Usage Guidelines
Use this command to delete an entry in the SNMPv3 snmpTargetParamsTable. This table specifies the
message processing model, security level, security model, and the storage parameters for messages to
any target addresses associated with a particular parameter name.
Example
The following command deletes a target parameters entry named P1:
configure snmpv3 delete target-params P1
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
172
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the parameter name associated with the target.
ExtremeWare 7.5 Command Reference Guide