Configure Snmpv3 Delete Target-Addr - Extreme Networks ExtremeWare Command Reference Manual

configure snmpv3 delete target-addr

configure snmpv3 delete target-addr [{{hex <hex value>} | <addr name>|
all}]
Description
Delete SNMPv3 target addresses.
Syntax Description
hex
addr name
all
Default
N/A.
Usage Guidelines
Use this command to delete an entry in the SNMPv3 snmpTargetAddressTable.
Example
The following command deletes target address named A1:
configure snmpv3 delete target-addr A1
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on the "e" series platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies a string identifier for the target address.
Specifies all target addresses.
configure snmpv3 delete target-addr
171