Configure Snmpv3 Delete Access - Extreme Networks ExtremeWare Command Reference Manual

configure snmpv3 delete access

configure snmpv3 delete access [all-non-defaults | {hex <hex value>} |
<group name> {sec-model [snmpv1 | snmpv2c | usm] sec-level [noauth |
authnopriv | priv]}}]
Description
Delete access rights for a group.
Syntax Description
all-non-defaults
hex
group name
sec-model
snmpv1
snmpv2c
usm
sec-level
noauth
authnopriv
authpriv
Default
The default values are:
• sec-model—USM
• sec-level—noauth
Usage Guidelines
Use this command to remove access rights for a group. Use the
all the security groups, except for the default groups. The default groups are: admin, initial, v1v2c_ro,
v1v2c_rw.
Deleting an access will not implicitly remove the related group to user association from the
VACMSecurityToGroupTable. To remove the association, use the following command:
configure snmpv3 delete group {{hex} <group name>} user [all-non-defaults | {{hex}
<user name> sec-model {sec-model [snmpv1|snmpv2c|usm]}}]
Example
The following command deletes all entries with the group name userGroup:
configure snmpv3 delete access userGroup
ExtremeWare 7.7 Command Reference Guide
Specifies that all non-default (non-permanent) security groups are to be
deleted.
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the group name to add or modify.
Specifies the security model to use.
Specifies the SNMPv1 security model.
Specifies the SNMPv2c security model.
Specifies the SNMPv3 User-based Security Model (USM).
Specifies the security level for the group.
Specifies no authentication (and implies no privacy) for the security level.
Specifies authentication and no privacy for the security level.
Specifies authentication and privacy for the security level.
configure snmpv3 delete access
keyword to delete
all-non-defaults
165