Private-Vlan Mapping Secondary-Vlan - Dell Force10 MXL Blade Reference Manual
Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs
Also See for Force10 MXL Blade:
- Configuration manual (690 pages) ,
- Deployment manual (89 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
Related
Commands
private-vlan mapping secondary-vlan
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
442
|
Private VLAN (PVLAN)
Only ports (and port channels) configured as promiscuous, host, or PVLAN trunk ports (as described
above) can be added to the PVLAN. No other regular ports can be added to the PVLAN.
After using this command to configure a VLAN as a primary VLAN, use the private-vlan mapping
secondary-vlan command to map secondary VLANs to this VLAN.
private-vlan mapping
secondary-vlan
show interfaces private-vlan
show vlan private-vlan
show vlan private-vlan mapping
switchport mode private-vlan
Map secondary VLANs to the selected primary VLAN.
[ no ] private-vlan mapping secondary-vlan
To remove specific secondary VLANs from the configuration, use the no private-vlan mapping
secondary-vlan vlan-list command.
vlan-list
Enter the list of secondary VLANs to associate with the selected primary VLAN, as described
above. The list can be
convention for range input.
none
INTERFACE VLAN
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
The list of secondary VLANs can be:
•
Specified in comma-delimited or hyphenated-range format.
•
Specified with this command even before they have been created.
•
Amended by specifying the new secondary VLAN to be added to the list.
private-vlan mode
show interfaces private-vlan
show vlan private-vlan
show vlan private-vlan
mapping
switchport mode private-vlan
Sets the mode of the selected VLAN to primary and then associate
secondary VLANs to it.
Displays the type and status of PVLAN interfaces.
Displays the PVLANs and/or interfaces that are part of a PVLAN.
Displays the primary-secondary VLAN mapping.
Sets the PVLAN mode of the selected port.
vlan-list
in comma-delimited or hyphenated-range format, following the
Sets the mode of the selected VLAN to community, isolated, or primary.
Displays the type and status of PVLAN interfaces.
Displays the PVLANs and/or interfaces that are part of a PVLAN.
Displays the primary-secondary VLAN mapping.
Sets the PVLAN mode of the selected port.
Advertisement
Table of Contents
