Show Ip Access-Lists - Dell PowerEdge M420 Reference Manual

Block DTP..................................Enable
Block UDLD................................ Enable
Block PAGP.................................Enable
Block SSTP................................ Enable
Block All................................. Enable

show ip access-lists

Use the show ip access-lists command in Privileged EXEC mode to display an
IP ACL and time-range parameters.
Syntax
show ip access-lists [
Parameter Description
Parameter
accesslistnumber
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays IP ACLs configured on a device.
console#show ip access-lists
Current number of ACLs: 2
256
ACL Commands
accesslistnumber
Description
The number used to identify the IP ACL.
]
Maximum number of ACLs: 100