Mac Address-Table Multicast Forward-All - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Parameter Description
Parameter
vlan-id
vlan
Default Configuration
The default for this command is not forbidden.
Command Mode
Global configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example forbids forwarding unregistered multicast addresses
on VLAN8.
console(config)#mac address-table multicast forbidden
forward-unregistered vlan 8

mac address-table multicast forward-all

Use the mac address-table multicast forward-all command in Interface
Configuration mode to enable forwarding of all Multicast packets. To restore
the default, use the no form of the mac address-table multicast forward-all
command.
Syntax
mac address-table multicast forward-all vlan
no mac address-table multicast forward-all vlan
Parameter Description
Parameter
vlan-id
vlan
Description
Valid VLAN ID (Range 1-4093).
Description
A valid VLAN ID (Range 1-4093).
vlan-id
vlan-id
Address Table Commands
265

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents