Data Center Bridging Commands
NOTE: Data Center Bridging commands are only supported on the PCM8024-k
switch. CLI commands and Dell OpenManage Switch Administrator pages are not
available for other switch models.
This chapter explains the following commands:
clear priority-flow-control statistics
datacenter-bridging
priority-flow-control mode on
clear priority-flow-control statistics
Use the clear priority-flow-control statistics command to clear all or
interface Priority-Flow-Control statistics.
Syntax
clear priority-flow-control statistics [ethernet
channel-number]
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel index.
•
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example #1
console#clear priority-flow-control statistics
ethernet 1/xg1
priority-flow-control priority
show interfaces datacenter-bridging
interface
Data Center Bridging Commands
9
port-
| port-channel
303