Show Mac Address-Table Multicast - Dell PowerEdge M420 Reference Manual

max-addr — The maximum number of addresses that can be learning on
•
the port. (Range: 0-600)
Default Configuration
The default value for this command is 100.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode
User Guidelines
This command has no user guidelines.
Example
The following example shows using this command in Ethernet Interface
Configuration mode.
console(config-if-1/0/3)# port security max 80

show mac address-table multicast

Use the show mac address-table multicast command in Privileged EXEC
mode to display Multicast MAC address table information.
Syntax
show mac address-table multicast [vlan
address ip-multicast-address
|
vlan_id — A valid VLAN ID value.
•
mac-multicast-address — A valid MAC Multicast address.
•
ip- multicast-address — A valid IP Multicast address.
•
— Multicast address format. Can be ip or mac.
• format
Default Configuration
If format is unspecified, the default is mac.
vlan-id
}] [format {ip | mac}]
Address Table Commands
mac-multicast-
] [address {
271