Show Ports Security Addresses - Dell PowerEdge M420 Reference Manual

User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the port-lock status are displayed.
console#show ports security
Port Status
---- ------
1/0/1 Locked
1/0/2 Unlocked -
1/0/3 Locked
The following table describes the fields in this example.
Field
Port
Status
Actions
Maximum
Trap
Frequency

show ports security addresses

Use the show ports security addresses command in Privileged EXEC mode to
display current dynamic addresses in locked ports.
Action
----------
Discard
Discard, Shutdown 8
Description
The port number.
The status can be one of the following: Locked
or Unlocked.
Action on violations.
The maximum addresses that can be associated
on this port in Static Learning mode or in
Dynamic Learning mode.
Indicates if traps would be sent in case of
violation.
The minimum time between consecutive traps.
Maximum Trap
--------- ------- -------
3 Enable
28 -
Disable
Address Table Commands
Frequency
100
-
-
283