Dell PowerEdge M420 Reference Manual page 245

containing this ACL rule is applied to an interface or bound to a VLAN, then
the ACL rule is applied when the time-range with specified name becomes
active. The ACL rule is removed when the time-range with specified name
becomes inactive.
list-name
access-list
number
udp | } any|
portkey
[{eq { |
dscp
] }[log] [time-range
[{mirror | redirect}
list-name
no access-list
Parameter Description
Parameter
list-name
|
deny permit
every
eq
number
srcip
srcmask
dstip
dstmask
portvalue
portkey
log
time-range-name
{deny | permit} {every | {{icmp | igmp | ip | tcp |
srcip srcmask
0-65535
}] [precedence
time-range-name
interface-id
]
Description
Access-list name up to 31 characters in length.
Specifies whether the IP ACL rule permits or denies an action.
Allows all protocols.
Equal. Refers to the Layer 4 port number being used as match
criteria. The first reference is source match criteria, the second
is destination match criteria.
Standard protocol number. Protocol keywords
icmp,igmp,ip,tcp,udp.
Source IP address.
Source IP mask.
Destination IP address.
Destination IP mask.
The source layer 4 port match condition for the ACL rule is
specified by the port value parameter (Range: 0–65535).
Or you can specify the
following keywords: domain, echo, ftp, ftpdata, http, smtp,
snmp, telnet, tftp, and www.
Specifies that this rule is to be logged.
Displays the name of the time-range if the ACL rule has
referenced a time range.
portkey 0-65535
[{eq { |
precedence
] [assign-queue
portkey
, which can be one of the
dstip dstmask
}]
tos tosmask
| tos
queue-id
]
ACL Commands
| dscp
245