Dell PowerEdge M420 Reference Manual page 249

Parameter
0x0600-0xFFFF
vlan eq
cos
log
time-range-name
assign-queue
queue-id
mirror
redirect
interface
Default Configuration
This command has no default configuration.
Command Mode
Mac-Access-List Configuration mode
User Guidelines
The no form of this command is not supported, as the rules within an ACL
cannot be deleted individually. Rather the entire ACL must be deleted and
respecified.
The assign-queue and redirect parameters are only valid for permit
commands.
Description
Specify custom ethertype value (hexadecimal range 0x0600-
0xFFFF).
VLAN number. (Range 0-4095)
Class of service. (Range 0-7)
Specifies that this rule is to be logged.
Use the time-range parameter to impose a time limitation on
the MAC ACL rule as defined by the parameter
name
.
Specifies particular hardware queue for handling traffic that
matches the rule.
0-6, where n is number of user configurable queues available for
that hardware platform.
Copies the traffic matching this rule to the specified interface.
Forwards traffic matching this rule to the specified physical
interface.
Valid physical interface in
1/0/12.
unit/slot/port
format, for example
ACL Commands
time-range-
249